Contains DOT HazMat Table Online pdf with DOT Hazmat Shipping and Packaging ExerciseProvides United States Department of Transportation (DOT) compliant training in Hazardous Materials labeling, shipping and placarding (HM-181 or HM-126 training). Contains additional DOT Hazmat packaging selection supplement.
Write down the "Course Number" above and click to enroll.
|TIME TO COMPLETE:||Approximately 5 hours|
|CONTINUING EDUCATION:||0.5 CEUs, 5 contact hours|
|ACCOUNT ACTIVE FOR:||30 days|
|REGULATIONS SATISFIED:||49 CFR, Part 172.704 (Subpart H)|
|REFRESH AGAIN:||3 years|
|NOTE:||This course has our basic DOT plus
in-depth requirements for selection of packaging used to satisfy DOT. Includes a module with general awareness training regarding hazardous materials safety and security as required by HM-232.
Do you package hazardous materials for shipment? Do you ship hazmat domestically?
Do you select the boxes, drums, cylinders, or other packing for your products?
It’s no secret that most traditional DOT Hazmat courses cover a broad range of information that does not apply to you. But the DOT Hazmat regulation stipulates that your training programs must cover your specific types of operations. This “function-specific” training is required for everyone who ships or receives hazardous materials.
What makes this course unique and separates it from other standard DOT Hazmat courses is that it covers in-depth the requirements for selection of the packaging that should be used to satisfy DOT Hazmat Shipping requirements. You might be in one of those types of operations where more discussion on appropriate package selection and the actual packaging requirements is important to your job.
“The content of the course reflected what I need to know, not just to satisfy DOT requirements, but also what I need to work effectively as a shipper/transporter of explosives.” – Salem, OH
This course also will fulfill your tri-annual DOT refresher requirement. Upon completion you will receive 0.5 CEUs and a certificate documenting compliance with the DOT requirement.
The DOT regulations as found in 49 CFR 171-173 list an extensive number of requirements on the shipping and packaging of hazardous wastes that can be somewhat confusing. However, failure to comply could lead to some hefty fines, not to mention the endangerment of people’s lives. If you:
…then you need this course to guide you successfully through the seemingly never ending list of regulations that control what you can and cannot do in regards to packaging/shipping hazardous materials.
The United States Department of Transportation (DOT) has established a series of regulations governing training programs for what are termed Hazmat Employees. The DOT training program is sometimes referred to as HM-181 or HM-126 training. It applies to anyone who meets any of the following criteria:
The structure and objectives of this online DOT Hazmat with Packaging course are centered on the requirements outlined in the DOT Hazmat regulation. Each unit is based on one or more of the following requirements. Upon completion of this program, the participants will have completed the following:
“Being the Corp. Safety Manager, I wanted to see if this class will meet the needs of the affected persons at other facilities, and it will.” – Des Plaines, IL
Students will complete 8 self-paced lessons, review questions at the end of each section, and a final test via electronic format. You will need a computer with Internet access and an email account. No text is required; all course materials are available online. The course will take approximately 5 hours to complete. Upon registration, you will receive a password via email, giving you access to the course contents at http://classes.hazmatschool.com/.
Passing this online DOT Hazmat with Packaging course requires completing end-of-section review questions and completing the final test with a grade of 75% or better. There is no passing grade required for the end-of-section review questions, but you must answer them. If you do not receive a grade of at least 75% on the final quiz, you may retake the quiz up to a total of three (3) times.
The course is designed to be self-paced. You may stay enrolled in this five-hour class for up to one month. After one month, you will need to re-enroll. Upon successful completion of the course, we will verify your work, and you will receive a DOT Hazmat Employee with Packaging Certificate via email in a couple of days.
You may submit, at any time of day or night, an electronic registration form to take this course. Once you have registered and paid your fees, you will be issued a receipt from our payment processor, followed within minutes by an email with login/password instructions for entry into the course.